Cabinets

The Heritage Coatings cabinet resurfacing process is thorough, systematic, and designed to deliver a factory-quality finish that outlasts brush-and-roll paint jobs by many years. We begin with a detailed assessment of your cabinets, noting the material type, current finish condition, any damage that needs repair, and the scope of work. All cabinet doors and drawer fronts are removed and labeled for precise reinstallation. Hardware is removed. All surfaces to be coated, including doors, drawer fronts, face frames, and any visible cabinet box surfaces, are thoroughly cleaned with industrial degreasers to remove grease, cooking residue, and any surface contamination that would prevent proper adhesion. Next, all surfaces are deglossed through a combination of chemical deglosser and mechanical sanding. This step is critical for adhesion and is one of the primary reasons professional cabinet finishes last so much longer than DIY paint jobs. Dings, dents, scratches, and minor wood damage are filled and sanded smooth. Surrounding surfaces including countertops, floors, appliances, walls, and backsplashes are carefully masked to protect them from overspray. The coating application uses professional HVLP spray equipment that delivers a smooth, even film with no brush marks, roller texture, or drip marks. We apply multiple coats of professional-grade cabinet coating, allowing each coat to dry and lightly sanding between coats for the smoothest possible result. The final coat produces a hard, durable surface that resists chipping, scratching, peeling, and staining. Once the coating has cured, all doors and drawers are reinstalled with new or existing hardware, and every cabinet is inspected for quality and proper alignment before we clear the project.

Heritage Coatings uses professional-grade cabinet coatings that are specifically formulated for kitchen and bathroom environments. These coatings are not the latex paints or chalk paints commonly used in DIY cabinet painting projects. They are high-adhesion, self-leveling acrylic and hybrid enamel formulations engineered to resist the unique stresses that kitchen cabinets face: grease and cooking residue, steam and moisture from cooking, frequent cleaning with household chemicals, constant opening and closing of doors and drawers, and impacts from daily use. Our coatings are applied with HVLP spray equipment rather than brushes or rollers because spray application produces a dramatically smoother finish. The difference between a sprayed cabinet finish and a brush-and-roll finish is visible from across the room. Spray application also allows us to achieve uniform coverage on panel details, edges, and inside profiles that are difficult to coat evenly with a brush. We offer our standard cabinet coating in any color, from classic whites and off-whites to modern grays, greens, navys, and bold designer colors. Custom color matching is available to coordinate with any paint chip, fabric swatch, or design reference. We also offer specialty finish options including distressed and antiqued looks, glazed finishes that add depth and dimension to raised-panel doors, two-tone designs with contrasting upper and lower cabinets, and custom decorative techniques.

Cabinet resurfacing with Heritage Coatings starts at $4,000 for a typical kitchen, with the final price depending on the number of doors and drawer fronts, the condition of the cabinets, and the finish options selected. Compare that to the cost of new cabinets. Stock kitchen cabinets from a home improvement store typically run $8,000 to $15,000 installed for an average kitchen. Semi-custom cabinets cost $15,000 to $25,000. Custom cabinets from a local cabinetmaker can exceed $30,000. Beyond the material cost, new cabinet installation requires demolition of the existing cabinets, potential damage to flooring, walls, backsplash, and countertops during removal, reinstallation of countertops and plumbing, and a timeline of two to four weeks during which your kitchen is a construction zone. Cabinet resurfacing preserves your existing countertops, plumbing, flooring, and backsplash. Most kitchen cabinet projects are completed in approximately four to five days with minimal disruption to your daily routine. You keep access to your kitchen throughout the process. The savings are typically 70 to 90 percent compared to new cabinets, and the visual result is virtually indistinguishable from a brand-new kitchen.

Montana homes present specific conditions that affect cabinet finishes. The dry air during the heating season causes wood to contract, which can stress paint and coating adhesion on cabinet surfaces. Kitchens in Montana often experience wider humidity swings between winter and summer than kitchens in more moderate climates. Wood stoves and fireplaces, common in Montana homes, can deposit fine soot and smoke residue on nearby cabinet surfaces. Heritage Coatings understands these conditions and selects coating systems that maintain flexibility and adhesion through Montana's seasonal cycles. Our surface preparation process ensures that the new finish bonds permanently to the cabinet substrate regardless of the original material, whether that is solid wood, MDF, thermofoil, or laminate.

Cabinet resurfacing serves a broad range of customers with different needs and budgets. Homeowners planning a kitchen refresh are our most common clients, choosing resurfacing to achieve a completely new look without the cost and disruption of a full remodel. Many homeowners pair cabinet resurfacing with new countertops or countertop refinishing, a new backsplash, and updated lighting for a total kitchen transformation at a fraction of the cost of gutting the space. Landlords and property managers use cabinet resurfacing to update rental kitchens between tenants, making units more attractive to prospective renters and supporting higher rent rates. Real estate agents frequently recommend cabinet resurfacing as one of the most impactful pre-sale improvements a seller can make. Airbnb and vacation rental operators invest in cabinet resurfacing to create kitchens that photograph well and earn positive guest reviews. Commercial clients including offices, medical facilities, and hospitality properties use our services to update break rooms, reception areas, and other spaces with cabinetry.

Cabinet finishes from Heritage Coatings are designed to last 10 to 15 years under normal kitchen use. We provide aftercare guidelines with every project. The basics are straightforward: clean with a soft cloth and non-abrasive cleaners, avoid harsh chemicals and abrasive scrubbing pads, and wipe up spills and splatters promptly. Avoid hanging wet towels on cabinet doors for extended periods. Following these simple practices keeps your resurfaced cabinets looking fresh and new for years.

Heritage Coatings provides cabinet resurfacing and refinishing services across Montana. Our service area includes Helena, Bozeman, Missoula, Great Falls, Billings, Butte, Kalispell, Whitefish, Livingston, Belgrade, Hamilton, and surrounding communities throughout western and central Montana. To schedule a free estimate, view color samples, and discuss finish options for your kitchen or bathroom cabinets, call Heritage Coatings at (406) 438-4288 or request a quote online.